Createx Restorer 120ml. is a water-based, biodegradable cleaner used for soaking airbrush and spray-gun parts after painting Partially dissolves dried paint allowing for easy clean-up with soap & water. Use as a soak for metallic parts: nozzle, needle, cup. Re-Usable. Keep in metal or ceramic container. Dissolves soft-plastics. Keep away from non-PTFE coated O-rings. Flush airbrush or spray-gun with water after using Restorer. Createx Restorer is used as a bath to soak metallic parts in. It may also be wiped onto paint-covered parts. It partially dissolves cured, water-based paint allowing for easy clean-up with soap and water. The Restorer begins to dissolve cured paint upon contact. After a minimum of 10 minutes, cured paint should be easy to scrub off with soap and water. Parts may soak in the restorer for an extended time. It is OK to soak parts overnight after painting, cleaning and rinsing the following day. Flush with water thoroughly after cleaning with Createx Restorer. Even trace amounts of it will affect paint. After flushing with water, spraying with Createx Airbrush Cleaner will acclimate the airbrush or spray-gun for paint. Do not spray the restorer through the airbrush or spray-gun. Use as a soak or wipe onto the cured paint. Use Createx Airbrush Cleaner as a rinse to clean colors from airbrush or spray-gun while painting. It dissolves soft plastics. Keep away from stencils, soft plastics and O-rings other than polytetrafluoroethylene (PTFE) coated rings. It is safe to use with harder plastics such as styrene. Pot-Life & Storage Createx Restorer does not have a pot-life. It may be used multiple times for repeated cleanings as a bath even after the liquid has become discolored. Keep in a metallic or ceramic container, such as a coffee mug, with a cover. For long term storage, keep air tight in a cool dry box or cabinet away from sunlight.