This classic rowing boat fits into many eras and can be used very versatile. In the bow of the boat is a seating area and a hatch. In addition to the resin boat, two oars, two oarlocks and a white metal backrest are included. The oarlocks can be attached centrally or at the rear. The set is in 28-30mm scale.
The dimensions of the boat are: L:103mm x W: 38,5mm
Age: not suitable for children under 36 months recommend for ages 14 and over
Scale: 28-30mm
Material: Resin White Metal
Delivery condition: unpainted models
1. If a product is especially small, you sometimes have to remove sprues. Depending on the piece, you may need a side cutter or hobby saw. If using the latter, it is recommended you use a filtering mask to ensure no resin dust enters your respiratory systems.
2. Afterwards you need to check for fine mold lines. If you find any, they are best removed with a hobby knife, scalpel or fine sand paper. If using the latter, it is recommended you use a filtering mask to ensure no resin dust enters your respiratory systems.
3. To remove impurities and fat and thus ensure greater adhesion of paint and glue it is necessary to clean the product with lukewarm water and a detergent (or soap). Tooth brushes are especially suited for this, but other brushes, even rough paint brushes, work as well. When the cleaning is finished, rinse off with clear water.
4. For assembly, we recommend superglue.
5. All our products should be primed before painting. Any of the common spray primers or airbrushes using acrylic paint can be used for that.
6. Have fun painting and gaming!
1. Sometimes you can find fine mold lines on metal pieces. They are best removed with a hobby knife, scalpel or fine sand paper.
2. To remove impurities and fat and thus ensure greater adhesion of paint and glue it is necessary to clean the product with lukewarm water and a detergent (or soap). Tooth brushes are especially useful for this, but other brushes, even rough paint brushes, work as well. When the cleaning is finished, rinse off with clear water.
3. For assembly, we recommend superglue.
4. All our products should be primed before painting. Any of the common spray primers or airbrushes using acrylic paint can be used for that.
5. Have fun painting and gaming!
